change

TD-15

Versatile & productive

The TD-15 medium crawler dozer Series are available in several versions starting from 190hp with an operating weight of 21.3t. These powerful dozers blend brute force with predicable and precise control and are engineered for optimum performance in road construction, land clearing and on construction sites.

Customers can specify their machines in either Standard (STD), Wide Track (WT) Long Track (LT) or Low Ground Pressure (LGP) versions. The machines can also be engineered for superior performance in Landfill Applications (LA).
View the full specifications, options, SFRs and videos of the TD-15 in action below.

If you cannot find the model below with the appropriate engine configuration (Emission Levels: Tier 3, Tier 4 Interim, Tier 4 Final) for your region, please email us or contact your local dealer.


TD-15M-Extra-LT - Working in Myanmar

TD-15M-Extra-LGP - Working in Poland

TD-15M-LA - Landfill in Poland

TD-15M-Extra - Crawler Dozer

TD-15M-LA - Landfill in Poland

TD-15R - Crawler Dozer

TD-15M-Extra - Crawler Dozer

TD-15R - Crawler Dozer

TD-15M-WT - Working in USA

TD-15M-WT - Working in Poland

TD-15M-Extra - Crawler Dozer

TD-15R - Crawler Dozer

TD-15M-Extra - Crawler Dozer

TD-15M-Extra - Working in USA

TD-15M-Extra-LT - Working in Poland

TD-15M-Extra - Working in Uruguay

TD-15M-LA - Landfill in Poland

TD-15M-WT - Working in the Philippines


Basic Specifications

Engine Range150 kW201 hp - 164 kW220 hp
Weight Range20.6 t - 21.6 t 45,415 lb - 47,620 lb
Blade Capacity Range3.8 - 5.7 m3 5.0 - 7.5 yd3
Ground Pressure36.9 kPa 5.4 psi
UNITS:

Available Models

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-15R sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-15R include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-15R provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSB 6.7/T4I
Displacement6.70 l408.9 in3
Rated Speed2000 RPM
Engine Output - Net150 kW201 hp
Rated Speed - Torque1500 RPM
Engine Torque949 Nm699.9 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/6
Shoe Pitch203 mm8.0 in
Track Shoe Width508 mm20.0 in
Ground Contact Area27000 cm24,185.0 in2
Number of Shoes39
Capacities
Fuel Tank388 l102.5 Gal(US)
Hydraulic Tank60 l15.9 Gal(US)
Blade Capacity5.70 m37.5 yd3
Dimensions
Height Top of ROPS (Max)3450 mm135.8 in
Width - Over Tracks2440 mm96.1 in
Track Length - On Ground2640 mm103.9 in
Blade Width3440 mm135.4 in
Performance
Speed Forward - Maximum10.50 km/h6.5 MPH
Speed Reverse - Maximum12.30 km/h7.6 MPH
Ground Bearing Pressure75.00 kPa10.9 psi
Drawbar Pull Maximum580 kN130.4 lbf
Implement Pump Flow164.00 l/min5.8 cfm
Operating Weight
Operating Weight20350 kg44,864.0 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • Angle Blade with tilt is ideal for side casting, backfilling, cutting ditches or setting a final grade by reducing the amount of manoeuvering required to do these jobs.
BLADE SELECTION SEMI-U ANGLE
UNDERCARRIAGE STD & LT STD & LT
BLADE CAPACITY
SAE J1265
5.7 m3
(7.45 yd3)  
3.8 m3
(5.0 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 455 mm (17.9”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a deeper penetration of 713 mm (28”).


ENGINE
The TD-15R is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSB 6.7 litre Tier 4 Interim/EU Stage IIIB Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 150 kW (201 hp) Net at rated engine speed of 2000 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-15R perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.

Optimal Wide Tracks (WT) for high performance traction, ripping and dozing in hard ground …

The TD-15R WT sets the standards for others to follow and is a result of DRESSTA`s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-15R WT include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-15R WT provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSB 6.7/T4I
Displacement6.70 l408.9 in3
Rated Speed2000 RPM
Engine Output - Net150 kW201 hp
Rated Speed - Torque1500 RPM
Engine Torque949 Nm699.9 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/8
Shoe Pitch203 mm8.0 in
Track Shoe Width762 mm30.0 in
Ground Contact Area46000 cm27,130.0 in2
Number of Shoes43
Capacities
Fuel Tank388 l102.5 Gal(US)
Hydraulic Tank60 l15.9 Gal(US)
Blade Capacity5.95 m37.8 yd3
Dimensions
Height Top of ROPS (Max)3450 mm135.8 in
Width - Over Tracks2790 mm109.8 in
Track Length - On Ground3050 mm120.1 in
Blade Width3590 mm141.3 in
Performance
Speed Forward - Maximum10.50 km/h6.5 MPH
Speed Reverse - Maximum12.30 km/h7.6 MPH
Ground Bearing Pressure44.90 kPa6.5 psi
Drawbar Pull Maximum580 kN130.4 lbf
Implement Pump Flow164.00 l/min5.8 cfm
Operating Weight
Operating Weight21005 kg46,308.0 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • 6-way blade allows the operator to make immediate compensations for sloping terrain, type of work being done and type of material being dozed.
BLADE SELECTION SEMI-U  6-WAY
UNDERCARRIAGE WT WT
BLADE CAPACITY
SAE J1265
5.95 m3
(7.8 yd3)
3.8 m3
(5.0 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 455 mm (17.9”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a deeper penetration of 713 mm (28”).


ENGINE
The TD-15R WT is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSB 6.7 litre Tier 4 Interim/EU Stage IIIB Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 150 kW (201 hp) Net at rated engine speed of 2000 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-15R WT perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.

Optimal power for superior balance and stability on wet or soft ground…

The TD-15R LGP dozer with Low Ground Pressure (LGP) tracks and undercarriage for superior balance and stability on wet or soft ground, sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-15R LGP include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-15R LGP provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSB 6.7/T4I
Displacement6.70 l408.9 in3
Rated Speed2000 RPM
Engine Output - Net150 kW201 hp
Rated Speed - Torque1500 RPM
Engine Torque949 Nm699.9 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/8
Shoe Pitch203 mm8.0 in
Track Shoe Width940 mm37.0 in
Ground Contact Area57000 cm28,835.0 in2
Number of Shoes43
Capacities
Fuel Tank388 l102.5 Gal(US)
Hydraulic Tank60 l15.9 Gal(US)
Blade Capacity3.60 m34.7 yd3
Dimensions
Height Top of ROPS (Max)3450 mm135.8 in
Width - Over Tracks3100 mm122.0 in
Track Length - On Ground3050 mm120.1 in
Blade Width3860 mm152.0 in
Performance
Speed Forward - Maximum10.50 km/h6.5 MPH
Speed Reverse - Maximum12.30 km/h7.6 MPH
Ground Bearing Pressure37.20 kPa5.4 psi
Drawbar Pull Maximum580 kN130.4 lbf
Implement Pump Flow164.00 l/min5.8 cfm
Operating Weight
Operating Weight21310 kg46,980.5 lb

Features & Benefits

WORKING EQUIPMENT
Blades
Due to lower blade capacity Straight Blade designs perform well when pushing heavier materials in soft and swampy areas.

BLADE SELECTION STRAIGHT
UNDERCARRIAGE  LGP
BLADE CAPACITY
SAE J1265
3.6 m3
(4.7 yd3)

Rippers
Ripping performance is affected by the required emphasis on lower ground pressure. The adjustable parallelogram multi-shank ripper offers 455 mm (17.9”) penetration in tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a deeper penetration of 713 mm (28”).


ENGINE
The TD-15R LGP is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSB 6.7 litre Tier 4 Interim/EU Stage IIIB Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 150 kW (201 hp) at rated engine speed of 2000 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.

 
ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-15R LGP perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.

Optimal Long Tracks (LT) for high performance traction, ripping and dozing in hard ground …

The TD-15R LT sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-15R LT include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-15R LT provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSB 6.7/T4I
Displacement6.70 l408.9 in3
Rated Speed2000 RPM
Engine Output - Net150 kW201 hp
Rated Speed - Torque1500 RPM
Engine Torque949 Nm699.9 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/8
Shoe Pitch203 mm8.0 in
Track Shoe Width508 mm20.0 in
Ground Contact Area31000 cm24,805.0 in2
Number of Shoes43
Capacities
Fuel Tank388 l102.5 Gal(US)
Hydraulic Tank60 l15.9 Gal(US)
Blade Capacity5.70 m37.5 yd3
Dimensions
Height Top of ROPS (Max)3450 mm135.8 in
Width - Over Tracks2440 mm96.1 in
Track Length - On Ground3050 mm120.1 in
Blade Width3440 mm135.4 in
Performance
Speed Forward - Maximum10.50 km/h6.5 MPH
Speed Reverse - Maximum12.30 km/h7.6 MPH
Ground Bearing Pressure65.80 kPa9.5 psi
Drawbar Pull Maximum580 kN130.4 lbf
Implement Pump Flow164.00 l/min5.8 cfm
Operating Weight
Operating Weight20500 kg45,194.7 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • Angle Blade with tilt is ideal for side casting, backfilling, cutting ditches or setting a final grade by reducing the amount of manoeuvering required to do these jobs.
BLADE SELECTION SEMI-U ANGLE
UNDERCARRIAGE STD & LT  STD & LT 
BLADE CAPACITY
SAE J1265

5.7 m3
(7.45 yd3)

3.8 m3
(5.0 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 455 mm (17.9”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a deeper penetration of 713 mm (28”).


ENGINE
The TD-15R LT is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSB 6.7 litre Tier 4 Interim/EU Stage IIIB Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 150 kW (201 hp) Net at rated engine speed of 2000 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-15R LT perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSB 6.7/T4F
Displacement6.70 l408.9 in3
Rated Speed2000 RPM
Engine Output - Net154 kW207 hp
Rated Speed - Torque1500 RPM
Engine Torque949 Nm699.9 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/6
Shoe Pitch203 mm8.0 in
Track Shoe Width508 mm20.0 in
Ground Contact Area27000 cm24,185.0 in2
Number of Shoes39
Capacities
Fuel Tank388 l102.5 Gal(US)
Hydraulic Tank60 l15.9 Gal(US)
Blade Capacity5.70 m37.5 yd3
Dimensions
Height Top of ROPS (Max)3450 mm135.8 in
Ground Clearance445 mm17.5 in
Width - Over Tracks2440 mm96.1 in
Track Length - On Ground2640 mm103.9 in
Blade Width3440 mm135.4 in
Ground Clearance445 mm17.5 in
Performance
Speed Forward - Maximum10.50 km/h6.5 MPH
Speed Reverse - Maximum12.30 km/h7.6 MPH
Ground Bearing Pressure75.40 kPa10.9 psi
Drawbar Pull Maximum580 kN130.4 lbf
Implement Pump Flow164.00 l/min5.8 cfm
Operating Weight
Operating Weight20760 kg45,767.9 lb

Features & Benefits

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSB 6.7/T4F
Displacement6.70 l408.9 in3
Rated Speed2000 RPM
Engine Output - Net154 kW207 hp
Rated Speed - Torque1500 RPM
Engine Torque949 Nm699.9 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/8
Shoe Pitch203 mm8.0 in
Track Shoe Width508 mm20.0 in
Ground Contact Area31000 cm24,805.0 in2
Number of Shoes43
Capacities
Fuel Tank388 l102.5 Gal(US)
Hydraulic Tank60 l15.9 Gal(US)
Blade Capacity5.70 m37.5 yd3
Dimensions
Height Top of ROPS (Max)3450 mm135.8 in
Ground Clearance445 mm17.5 in
Width - Over Tracks2440 mm96.1 in
Track Length - On Ground3050 mm120.1 in
Blade Width3440 mm135.4 in
Ground Clearance445 mm17.5 in
Performance
Speed Forward - Maximum10.50 km/h6.5 MPH
Speed Reverse - Maximum12.30 km/h7.6 MPH
Ground Bearing Pressure66.20 kPa9.6 psi
Drawbar Pull Maximum580 kN130.4 lbf
Implement Pump Flow164.00 l/min5.8 cfm
Operating Weight
Operating Weight20910 kg46,098.6 lb

Features & Benefits

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSB 6.7/T4F
Displacement6.70 l408.9 in3
Rated Speed2000 RPM
Engine Output - Net154 kW207 hp
Rated Speed - Torque1500 RPM
Engine Torque949 Nm699.9 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/8
Shoe Pitch203 mm8.0 in
Track Shoe Width940 mm37.0 in
Ground Contact Area57000 cm28,835.0 in2
Number of Shoes43
Capacities
Fuel Tank388 l102.5 Gal(US)
Hydraulic Tank60 l15.9 Gal(US)
Blade Capacity3.60 m34.7 yd3
Dimensions
Height Top of ROPS (Max)3450 mm135.8 in
Ground Clearance445 mm17.5 in
Width - Over Tracks3100 mm122.0 in
Track Length - On Ground3050 mm120.1 in
Blade Width3860 mm152.0 in
Ground Clearance445 mm17.5 in
Performance
Speed Forward - Maximum10.50 km/h6.5 MPH
Speed Reverse - Maximum12.30 km/h7.6 MPH
Ground Bearing Pressure37.40 kPa5.4 psi
Drawbar Pull Maximum580 kN130.4 lbf
Implement Pump Flow164.00 l/min5.8 cfm
Operating Weight
Operating Weight21720 kg47,884.3 lb

Features & Benefits

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSB 6.7/T4F
Displacement6.70 l408.9 in3
Rated Speed2000 RPM
Engine Output - Net154 kW207 hp
Rated Speed - Torque1500 RPM
Engine Torque949 Nm699.9 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/8
Shoe Pitch203 mm8.0 in
Track Shoe Width762 mm30.0 in
Ground Contact Area46000 cm27,130.0 in2
Number of Shoes43
Capacities
Fuel Tank388 l102.5 Gal(US)
Hydraulic Tank60 l15.9 Gal(US)
Blade Capacity5.95 m37.8 yd3
Dimensions
Height Top of ROPS (Max)3450 mm135.8 in
Ground Clearance445 mm17.5 in
Width - Over Tracks2790 mm109.8 in
Track Length - On Ground3050 mm120.1 in
Blade Width3300 mm129.9 in
Ground Clearance445 mm17.5 in
Performance
Speed Forward - Maximum10.50 km/h6.5 MPH
Speed Reverse - Maximum12.30 km/h7.6 MPH
Ground Bearing Pressure45.70 kPa6.6 psi
Drawbar Pull Maximum580 kN130.4 lbf
Implement Pump Flow164.00 l/min5.8 cfm

Features & Benefits

BLADE SELECTION SEMI-U  6-WAY
UNDERCARRIAGE WT WT
BLADE CAPACITY
SAE J1265
5.95 m3
(7.8 yd3)
3.4 m3
(4.4 yd3)